Portal frames up to 1000 kN with variable height and width
The portal frames are normally connected by bolts
to the base, therefore their position can vary according to the test
requirements. They are also adjustable in height, as it is possible to move the
crossbeam vertically and secure it with bolts to the lateral uprights.
The frame is completed by two sturdy
longitudinal beams connecting the portal frames, on which, depending on the test
requirements, the load cylinders can be fixed.
Possibility to secure and position the
vertical actuators discreetly along the crossbeams of the structure.
Possibility to secure and position the
horizontal actuators discreetly along the "pillars" of the structure.
Image
Portal frames up to 200 kN with variable height and width
The portal frames are normally connected by bolts
to the base, therefore their position can vary according to the test
requirements. They are also adjustable in height, as it is possible to move the
crossbeam vertically and secure it with bolts to the lateral uprights.
The frame is completed by two sturdy
longitudinal beams connecting the portal frames, on which, depending on the test
requirements, the load cylinders can be fixed.
Possibility to secure and position the
vertical actuators discreetly along the crossbeams of the structure.
Possibility to secure and position the
horizontal actuators discreetly along the "pillars" of the structure.
Image
Clamping Plate
The clamping plate is a base used in
general mechanics to anchor parts of any material and shape and then perform
operations of any kind: from controls, to assembly, motor and mechanical
components performance tests and positioning of very complex structures.
This plate has an excellent effect on
vibration damping.
Approximate weight: 6.500 kg.
Image_1 Image_2 Dimensions
250 kN Seismic Walls
Seismic walls are adequately dimensioned
fixing plates fixed to a vertical wall.
These connections are made by means of
special slots used for fastening to the reaction wall.
T-slots are provided on the vertical axis
for the mounting of hydraulic cylinders.
Image
Clamping Cubes
These clamping cubes consists of a
parallelepiped structure in carbon steel and are made by assembling 5 steel
sides, suitably flattened with machine tools and equipped with T slots on all 5
faces.
Each side is completed by the connecting brackets to the beam base.
Image
Reaction "Arms"
Reaction "arms" with variable height from 800
mm to 3500 mm.
Mounting of the horizontal actuator
adjustable in height through special T-slots.
Dimensioned for static and dynamic lateral
loads up to 250 kN.
Image
Reaction Brackets
The “L” shaped brackets are suitable for
mounting a 250 kN horizontal or vertical axis cylinder.
The bracket can also be connected to the
base or other structures by bolts.
The flatness of the surface of connection
to the cylinder and its perpendicularity to the horizontal support plane is
ensured by the final processing on the machine tools.
Image